Wood Lathe Bowl Chuck with 8" Jumbo Jaws + 2 Jaw Sets Fits Shopsmith 5/8" New

Description

Description:
This is a
Wood Lathe Bowl Chuck consisting of a PSI 4" Utility-Grip 4-Jaw Self-Centering Wood Turning Chuck with 2 Jaw Sets, plus an 8" Jumbo Jaw Set, for use on
Shopsmith
wood lathes with a 5/8" plain spindle and also 1-8 threaded lathe spindles.
Here are the specs:
PSI 4" Wood Lathe Bowl Chuck for finishing bowl bottoms
8" Bowl capacity with jumbo jaws installed and fully extended
Can be used as shown in the pictures on 8" lathes or larger
Set includes: 4" Utility-Grip Chuck (w/ extra sets of jaws) + 8" Jumbo Jaw Set
4" PSI Utility-Grip Chuck system
4-Jaw x 4" diameter self-centering chuck threaded 1x8
With
Shopsmith
spindle adapter for 5/8" plain spindles
With 2 Jaw sets
#1 Step jaws grip OD's from 0" to 1-7/8" and ID's from 7/16" to 2-3/8"
#2 Step jaws grip OD's from 0" to 1-7/8" and ID's from 1-1/2" to 3-1/4"
Round jaws grip OD's from 1-7/16" to 3" and ID's from 1-15/16" to 3-5/8"
With T-handle Allen wrench
With set of 2 chuck tightening rods
With 8 extra jaw mounting screws
With screw chuck stud
With 8 pc set of 1/2" rubber coated pins
With 8 pc set of 3/4" rubber coated pins
With set-up and operating instructions & all hardware to mount the 3 jaw sets
Chuck body is chrome plated...jaws are black oxide finished
Jumbo Jaws are chrome plated steel
This is a super versatile 4" wood lathe chuck system for finishing the bottom of bowls up to
8"
in diameter.
Please note that we also sell Utility Grip Chucks, Jumbo Jaw Sets, and Flat Extension Jaw Sets on separate listings in our eBay store.
Please study the pictures & specs and email with any questions.  Thanks for stopping by.
Fast Shipping Included in the USA.
Shipping weight is 15-1/4 Lbs.
Safety Note: It is very important that you securely fasten the spindle adapter to your lathe spindle, and the chuck to the spindle adapter. Failure to properly secure these components can result in injury.