-40%

100k NEW STYLE Hydronic hanging heater, W/ CORD, Variable speed fan,& THERMOSTAT

$ 284.59

Availability: 21 in stock
  • Item must be returned within: 30 Days
  • MPN: Does not apply
  • All returns accepted: Returns Accepted
  • Return shipping will be paid by: Buyer
  • Condition: New
  • UPC: 689807259707
  • Brand: Undisclosed
  • Refund will be given as: Money Back

    Description

    100,000 BTUs / 100 PSI
    Hanging unit heater for garages, warehouses, greenhouses, ect. Hangs from ceiling and uses hot water to heat your dwelling. Other Sizes available,Units plug directly into a wall outlet, and comes with Thermostat! Does
    NOT
    come with the mounting rods to hang from ceiling.
    Fan speed can be controlled with a Rheostat, available for purchase
    separately
    .
    New style makes your installation look much cleaner as both inlet and return pipes
    (The inlet/outlet ports are the same no matter which one you choose for hot or cold)
    come out next to each other on the top of the unit.  This also makes the units much more efficient because no air becomes trapped in the unit.
    These heat exchangers are to be hooked up to a boiler or a chilled water source.
    If using as a chilled water source, a drip pan will need to be provided by owner.
    BP-100
    Dimensions:
    Width = 19 ¾”
    Height = 16”
    Outlet Port: 1"
    Depth
    = 14” including fan
    Weight = 34 lbs – Shipping Weight = 43 lbs.
    CFM= 1,000
    These are special in the fact they can be mounted either the typical way with threaded rods though the unit or mounted to bolt holes on the sides of the units.
    These units can be mounted in any direction and are complete with adjustable front louvers. All units have 1 inch copper inlet and outlets for high flow.
    We provide a
    limited lifetime
    warranty
    against manufacturer's defects.
    All hanging heaters come packed in foam to prevent damage during shipping. We are a well established US company with many years of experience selling parts and supplies to the solar and outdoor wood furnace industries. Feel free to contact us with any questions you may have about hydronic heating or cooling parts and supplies whether you bought them from us or not.
    LuxPro 300 Programmable Thermostat 5-2 Day
    5/2 Programming Weekdays and Weekends can be programmed differently
    · Easy to use Lux Speed Dial
    Armchair Programmable
    Separate Programs for Heating and Cooling
    ETL Approved
    Setting Range 45 Degrees F to 90 Degrees F
    F/C Selectable
    Temporary Temperature Override
    Manual Hold
    User Temperature Calibration
    Power on/Off Switch
    Adjustable Cycle Rate
    Plugs into wall outlet
    Compatible with Window Air Conditioners and Space Heaters that Automatically Restart After Power Reconnection
    Normal 120V-15A Plug
    NOT
    compatible with Heat Pumps, Gas, Oil, or Electric Furnaces, Hydronic Systems or Line Voltage Systems
    ***We will ship to Alaska/e call for shipping quote***